| About |
|---|
| NYLOY® MG-1113B is a Polyamide 66 (Nylon 66) material filled with 13% glass fiber. It is available in Asia Pacific or North America. Primary attribute of NYLOY® MG-1113B: Impact Modified.&& |
| Product Description | |
|---|---|
| Supplier | Nytex |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | High impact resistance |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 1.00 | g/cm³ | ASTM D792 |
| — | 1.18 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD | 0.78 | % | ASTM D955 |
| TD | 1.1 | % | ASTM D955 |
| TD | 1.1 | % | ISO 294-4 |
| MD | 0.78 | % | ISO 294-4 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 13 | kJ/m² | ISO 179/1eA |
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 150 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 195 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 94 | ASTM D785 | |
| R-level | 94 | ISO 2039-2 | |
| tensile strength | |||
| — | 71.6 | MPa | ASTM D638 |
| — | 65.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 3.0 | % | ASTM D638 |
| fracture | 2.6 | % | ISO 527-2 |
| Bending modulus | |||
| — | 3630 | MPa | ASTM D790 |
| — | 3400 | MPa | ISO 178 |
| bending strength | |||
| — | 111 | MPa | ASTM D790 |
| — | 102 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |