Fortron® FX75T1

About
Fortron® FX75T1 is an unreinforced, impact-modified poly(phenylene sulfide) with high melt viscosity suitable for extrusion.&&

Product Description
SupplierCelanese
GenericPPS
Material StatusCommercial: Negative
FeaturesHigh impact resistance,High Viscosity
AvailabilitysAfrica & Middle East ,North America,Latin America,Europe
Process MethodsExtrusion

Technical Data
PHYSICALNominal valueUnitTest method
Density1.20g/cm³ISO 1183
Shrinkage rate ISO 294-4
TD2.1%ISO 294-4
MD1.9%ISO 294-4

MECHANICALNominal valueUnitTest method
Tensile modulus1650MPaISO 527-2/1A/1
tensile strength
fracture42.0MPaISO 527-2/1A/50
Tensile strain
fracture80%ISO 527-2/1A/50
Bending modulus
23℃1600MPaISO 178

IMPACTNominal valueUnitTest method
Charpy Notched Impact Strength ISO 179/1eA
-30℃46kJ/m²ISO 179/1eA
23℃70kJ/m²ISO 179/1eA
Charpy Unnotch Impact strength
23℃无断裂 ISO 179/1eU

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed95.0ISO 75-2/A
Vicat Softening Temp
B50120ISO 306
Melting temperature280ISO 11357-3
Linear coefficient of thermal expansion ISO 11359-2
MD9.8E-51/℃ISO 11359-2
TD1.2E-41/℃ISO 11359-2

Electrical performanceNominal valueUnitTest method
Volume resistivity2.0E+17ohms·cmIEC 60093
Relative permittivity
1 MHz3.24 IEC 60250
Dissipation factor
1 MHz6.0E-4 IEC 60250

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.