NYLOY® NG-0215N

About
NYLOY® NG-0215N is a Polyamide 6 (Nylon 6) material filled with 15% glass fiber. It is available in Asia Pacific or North America.&&

Product Description
Supplier	Nytex
Generic	PA6
Material Status	Commercial: Negative
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.06	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
tensile strength	103	MPa	ASTM D638
Tensile strain
fracture	2.0	%	ASTM D638
Bending modulus	5590	MPa	ASTM D790
bending strength	177	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	44	J/m	ASTM D256

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.