Akoafloor PB R509 CAMEL

About
Akoafloor PB R 509 CAMEL is a highly isotactic random copolymer manufactured from butene-1 monomer. The product provides good long term hydrostatic strength also at elevated temperatures combined with extremely high flexibility. Akoafloor PB R 509 CAMEL complies with requirements specified in ISO 12230, DIN 16968/DIN 16969 for PB-1 pipe applications. The grade is typically used for under floor heating or surface cooling applications. Akoafloor PB R 509 CAMEL is available in camel colour in pellet form. Akoafloor PB R 509 CAMEL may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.&&

About

Akoafloor PB R 509 CAMEL is a highly isotactic random copolymer manufactured from butene-1 monomer. The product provides good long term hydrostatic strength also at elevated temperatures combined with extremely high flexibility. Akoafloor PB R 509 CAMEL complies with requirements specified in ISO 12230, DIN 16968/DIN 16969 for PB-1 pipe applications. The grade is typically used for under floor heating or surface cooling applications. Akoafloor PB R 509 CAMEL is available in camel colour in pellet form. Akoafloor PB R 509 CAMEL may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.&&

Product Description
Supplier	LyondellBasell
Generic	PB
Material Status	Commercial: Active
Features	Good flexibility,Random copolymer,Welding,High isotacticity,Heat Stabilized
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.925	g/cm³	ISO 1183
Melt Flow Rate
190℃，21.6kg	0.70	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	15.0	MPa
fracture	35.0	MPa
Tensile strain
fracture	320	%	ISO 8986-2
Bending modulus	370	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Squeeze description	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Processing (melt) temperature	200 to 240	°C

Melt temperature	175 to 190	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.