Ad-Tech Epoxy ESR-212

About
Ad-Tech Epoxy ESR-212 is an Epoxy; Epoxide (Epoxy) product filled with iron. It can be processed by coating and is available in North America. Applications of Ad-Tech Epoxy ESR-212 include coating applications, repairing material and tools. Primary characteristic: good adhesion.&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Features	Machinable,Thixotropic,Good bond
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	2.41	g/cm³	ASTM D1895

THERMAL	Nominal value	Unit
Thermosetting components
resin	按重量计算的混合比: 100
Hardening method	按重量计算的混合比: 10
storage stability
25 ℃	12 to 18	min
stripping time
23℃	60 to 120	min

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	90		ASTM D2240
tensile strength
yield	34.5	MPa	ASTM D638
bending strength
yield	52.7	MPa	ASTM D790
compressive strength	114	MPa	ASTM D695

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.