| About |
|---|
| Has the lowest water absorption among nylons, good dimensional stability, oil resistance and alkali proof, non toxic, under low temperature, it has very good toughness, can be used for extruding, injection molding, blow molding or producing into powder spraying coating. It can substitute for Nylon 11 and Nylon 12.&& |
| Product Description | |
|---|---|
| Supplier | Guangyin |
| Generic | PA 1212 |
| Material Status | Commercial: Active |
| Features | Alkali resistant,Good Dimensional Stability,Low or no water absorption,Grease resistance,Low temperature toughness,Nontoxicity |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | |||
| yield | > 50.0 | MPa | |
| Tensile strain | |||
| fracture | > 250 | % | |
| Bending modulus | > 700 | MPa | |
| bending strength | < 45.0 | MPa | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | > 30 | kJ/m² | |
| Notched impact strength of cantilever beam | 无断裂 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | > 140 | ℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |