TOPAS® 6013EC-01

About
TOPAS® 6013EC-01 is a Cyclic Olefin Copolymer (COC) product. It is available in Africa & Middle East, Asia Pacific, or Latin America. Characteristics include: Flame Rated Copolymer Good Toughness&&

Product Description
Supplier	Polyplastics
Generic	COC
Material Status	Commercial: Active
Features	Good flexibility,Copolymer,HB
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.00	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	36.0	MPa	ISO 527-2/1A/5
Tensile strain
fracture	30	%	ISO 527-2/1A/5
Bending modulus	1800	MPa	ISO 178
bending strength	62.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	36	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	130	℃	ISO 75-2/B

Electrical performance	Nominal value	Test method
Relative permittivity
1.00 GHz	2.27	IEC 60250
Dissipation factor
1 GHz	6.0E-4	IEC 60250

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.