Jampilen EP548R

About
“Jampilen EP548R” is a nucleated, antistatic formulated, high fuidity heterophasic copolymer used for thin-walled injection molding. Items made with “Jampilen EP548R” exhibit high stiffness, relatively good impact resistance and excellent antistatic properties. Due to its excellent moldability and short cycle times, “Jampilen EP548R” allows high productivity rates. The fnished items show good mechanical properties, and high dimensional stability. “Jampilen EP548R” is very well suited for the production of thin-walled articles or articles with long flow paths such as flower pots, containers, housewares, flters, flter housings and appliance components. “Jampilen EP548R” is suitable for food contact. Features: Good impact strength High stiffness Excellent antistatic properties Excellent moldability and short cycle times Heterophasic copolymer Typical Applications: Thin-walled articles Articles with long flow paths such as flower pots, containers, housewares, flters, flter housings and appliance components Sports, Leisure and toys&&

About

“Jampilen EP548R” is a nucleated, antistatic formulated, high fuidity heterophasic copolymer used for thin-walled injection molding. Items made with “Jampilen EP548R” exhibit high stiffness, relatively good impact resistance and excellent antistatic properties. Due to its excellent moldability and short cycle times, “Jampilen EP548R” allows high productivity rates. The fnished items show good mechanical properties, and high dimensional stability. “Jampilen EP548R” is very well suited for the production of thin-walled articles or articles with long flow paths such as flower pots, containers, housewares, flters, flter housings and appliance components. “Jampilen EP548R” is suitable for food contact. Features: Good impact strength High stiffness Excellent antistatic properties Excellent moldability and short cycle times Heterophasic copolymer Typical Applications: Thin-walled articles Articles with long flow paths such as flower pots, containers, housewares, flters, flter housings and appliance components Sports, Leisure and toys&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Good Dimensional Stability,Nucleation,Quick molding cycle,Food contact compliance,Copolymer,Antistatic property
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	21	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	50	J/m	ASTM D256
23℃	85	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	110	℃	ASTM D648
Vicat Softening Temp	149	℃	ASTM D1525 2
Accelerate oven aging
150℃	360	hr	ASTM D3012

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	98		ASTM D785
tensile strength
yield	27.0	MPa	ASTM D638
Tensile strain
yield	7.0	%	ASTM D638
Bending modulus	1500	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.