Resan SAN - SOLIAO

About
Resan SAN is a General Purpose Polystyrene product. It is available in Europe.&&

Product Description
Generic	PS (GPPS)
Material Status	Commercial: Active
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04 to 1.07	g/cm³	ISO 1183
Melt Flow Rate
200℃，5.0kg	6.0 to 13	g/10min

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2100 to 3100	MPa	ISO 527-2
tensile strength	20.0 to 23.0	MPa	ISO 527-2
Tensile strain
fracture	2.0 to 30	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	2.0 to 10	kJ/m²	ISO 179/1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	73.0	℃	ISO 75-2/A
Vicat Softening Temp	91.0	℃	ISO 306/A120

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.