Enable™ 20-10 Series

About
Enable™ 2010 Series Enable 2010 resins are ethylene 1-hexene copolymers. Enable pPE resins offer an outstanding balance between processing and film properties, including tensile, impact and puncture. Enable 2010 resins are available for blown film, both formulated and non-formulated. A heavily stabilized formulation for cast film processing is also available.&&Enable™ 2010 Series Enable 2010 resins are ethylene 1-hexene copolymers. Enable pPE resins offer an outstanding balance between processing and film properties, including tensile, impact and puncture. Enable 2010 resins are available for blown film, both formulated and non-formulated. A heavily stabilized formulation for cast film processing is also available.&&

About

Enable™ 2010 Series Enable 2010 resins are ethylene 1-hexene copolymers. Enable pPE resins offer an outstanding balance between processing and film properties, including tensile, impact and puncture. Enable 2010 resins are available for blown film, both formulated and non-formulated. A heavily stabilized formulation for cast film processing is also available.&&Enable™ 2010 Series Enable 2010 resins are ethylene 1-hexene copolymers. Enable pPE resins offer an outstanding balance between processing and film properties, including tensile, impact and puncture. Enable 2010 resins are available for blown film, both formulated and non-formulated. A heavily stabilized formulation for cast film processing is also available.&&

Product Description
Supplier	ExxonMobil
Generic	mPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
Secant modulus			ASTM D882
1% secant, MD	205	MPa	ASTM D882
1% secant, TD	230	MPa	ASTM D882
tensile strength			ASTM D882
MD, yield	9.64	MPa	ASTM D882
TD, yield	10.4	MPa	ASTM D882
MD, fracture	57.5	MPa	ASTM D882
TD, fracture	53.1	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture	520	%	ASTM D882
TD, fracture	730	%	ASTM D882
Drop hammer impact	190	g	ASTM D1709-A
Elmandorf tear strength			ASTM D1922
MD	120	g	ASTM D1922
TD	560	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
45°	61		ASTM D2457
Haze	7.1	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.