Vipel® F764-BTX-00

About
AOC’s Vipel F764 Series is a high cross-linked isophthalic polyester resin. AOC’s Vipel F764 Series resins were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels. BENEFITS UL Recognition AOC’s Vipel F764 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III. Corrosion Resistance Vipel F764 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC’s “Corrosion Resistant Resin Guide” for corrosion reistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. Versatile Suitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.&&

About

AOC’s Vipel F764 Series is a high cross-linked isophthalic polyester resin. AOC’s Vipel F764 Series resins were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels. BENEFITS UL Recognition AOC’s Vipel F764 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III. Corrosion Resistance Vipel F764 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC’s “Corrosion Resistant Resin Guide” for corrosion reistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. Versatile Suitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.&&

Product Description
Generic	间苯二甲酸聚酯
Material Status	Commercial: Active
Features	Crosslinked,Corrosion Resistant,Acidproof,Grease resistance,Solvent resistance,Gasoline resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
styrene content	44	%

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	139	℃	ASTM D648

Supplementary information	Nominal value	Unit
Gel to Peak	10.0	min
exothermic peak	166	℃
Thixotropic index
25℃	3.00

Uncured Properties	Nominal value	Unit
Density	1.08	g/cm³
viscosity
25℃，Brookfield LV	0.60	Pa·s
Gelation time
25℃	20	min

MECHANICAL	Nominal value	Unit	Test method
Babbitt hardness	51		ASTM D2583
Tensile modulus	3520	MPa	ASTM D638
tensile strength	69.6	MPa	ASTM D638
Tensile strain
fracture	2.3	%	ASTM D638
Bending modulus	3860	MPa	ASTM D790
bending strength	123	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.