Orevac® 18910

About
OREVAC® 18910 is a maleic anhydride modified linear low-density polyethylene available in pellet form. It can be processed on most extrusion equipments designed to process conventional polyolefins. Applications OREVAC® 18910 has been designed to develop a reliable bonding strength between PS, PE, EVOH and PA in coextruded multi-layer structures like films or sheets.&&

Product Description
SupplierArkema
GenericPE
Material StatusCommercial: Active
FeaturesGood bond,Copolymer
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe
Process MethodsExtrusion

Technical Data
PHYSICALNominal valueUnitTest method
Density0.950g/cm³ISO 1183, ASTM D1505
Melt Flow Rate
190℃，2.16kg1.5g/10minASTM D1238，ISO 1133

THERMALNominal valueUnitTest method
Vicat Softening Temp77.0℃ISO 306/A, ASTM D1525 1
Melting temperature117℃ISO 11357-3

Process Conditions
ExtrusionNominal valueUnitTest method
Barrel 1 zone temperature190 to 200°C
Barrel 2 zone temperature200°C
Barrel 3 zone temperature200 to 210°C
Barrel 4 zone temperature210 to 220°C
Barrel 5 zone temperature220 to 230°C
Melt temperature< 250°C
Nozzle temperature220 to 240°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.