| About |
|---|
| Boltaron 4800 is a proprietary, fire retardant, extruded Acrylic/PVC alloy sheet designed specifically for mass transit and aircraft interior applications. Boltaron 4800 meets ASTM E-162 and ASTM E-662 stringent requirements for flammability and low smoke emissions and FTA, UMTA and Docket 90A guidelines. Boltaron 4800 offers excellent impact strength, abrasion resistance, stain and chemical resistance, and thermoformability. Colors: Custom Gauges: .040 to .250 Widths: Up to 60″ Lengths: Up to 120″ Custom Sizes: Upon request Textures: Coarse Matte (CM) Felt (FT) Haircell (HC) Levant (LT) Mesa (MS) Suede (SD) LNE “M”, P92-507: M1&& |
| Product Description | |
|---|---|
| Generic | PMMA+PVC |
| Material Status | Commercial: Active |
| Features | The fouling resistance,High impact resistance,Low smoke,Flame Characteristics,Good wear resistance,Solvent resistance,V-0 |
| Availabilitys | North America |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.43 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 160 to 270 | J/m | ASTM D256 |
| Drop hammer impact | > 36.2 | J | ASTM D3029 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 73.9 to 75.6 | ℃ | ASTM D648 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 | |
| NBS smoke density | |||
| Flame Mode | < 100 | ASTM E162 | |
| Flame Mode | < 200 | ASTM E162 | |
| Smoldering Mode | < 100 | ASTM E662 | |
| Smoldering Mode | < 200 | ASTM E162 | |
| Radiation plate flame spread index | < 10.0 | ASTM E162 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Forming temperature | 335 to 365 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 102 to 104 | ASTM D785 | |
| tensile strength | |||
| yield | 33.8 to 35.9 | MPa | ASTM D638 |
| Bending modulus | 2070 to 2280 | MPa | ASTM D790 |
| bending strength | |||
| yield | 53.8 to 57.9 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 4 min |
| 3. 90 sec |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |