| About |
|---|
| EVALENE ® HJ04601 has narrow molecular weight distribution and is specifically intended for use in injection molding applications requiring superior overall mechanical properties. It is designed to deliver an outstanding combination of long-term strength and durability. EVALENE ® HJ04601 is UV stabilized for excellent outdoor performance and weatherability resulting in wide end-use latitude. FEATURES Medium Flow Very high Izod impact strength High stiffness and rigidity High environmental stress crack resistance (ESCR) Meets Philippine FDA food contact requirements Halal-certified TYPICAL APPLICATIONS Pallets Dunnage trays Crates Industrial parts&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Good flexibility,Solvent resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD：48 hrs | 1.0 to 1.7 | % | Internal Method |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic detergent, F50 | 3.80 | hr | ASTM D1693B |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 160 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 76.0 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 59 | ASTM D2240 | |
| Tensile modulus | |||
| 1% secant | 1340 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 25.0 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 18 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 793 | MPa | ASTM D790-A |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 180 to 220 | °C | |
| Mold temperature | 20 to 40 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 3. 0.20 in/min |
| 4. 2.0 in/min |
| 5. 0.051 in/min |
| 6. Partial Break |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |