J1020FA20 - SOLIAO

About
J1020FA20是一种薄膜级，可以在传统的吹膜生产线上轻松加工。该等级在没有任何滑爽添加剂的情况下制造，以促进层压期间的粘合

Product Description
Supplier	Reliance
Generic	Linear low density polyethylene
Material Status	Commercial: Active

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
MD, fracture	20	MPa	ASTM D882
TD, fracture	19	MPa	ASTM D882
Tensile strain
MD, fracture	275	%	ASTM D882
TD	425	%	ASTM D882

IMPACT	Nominal value	Unit	Test method
Drop hammer impact
forty μ m. Blown film	3.0	g	ASTM D1709-A

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.