TIPPLEN® H 659 F

About
TIPPLEN H 659 F is a homopolymer polypropylene with medium molecular weight and excellent mechanical properties for extrusion. This grade includes nucleating agent, so it has excellent optical properties and very high modulus values. This grade does not contain antiblocking and slip agent. TIPPLEN H 659 F is recommended for extrusion of sheets for thermoforming household articles, blow moulded bottles, packaging for diary products, fruit-trays, biscuits, chocolates etc. Due to outstanding heat deflection stability (HDT), this grade is exquisitely applicable for food packaging, which are filled hot. TIPPLEN H 659 F is suitable for food contact. The product complies with Food Contact Regulations.&&

About

TIPPLEN H 659 F is a homopolymer polypropylene with medium molecular weight and excellent mechanical properties for extrusion. This grade includes nucleating agent, so it has excellent optical properties and very high modulus values. This grade does not contain antiblocking and slip agent. TIPPLEN H 659 F is recommended for extrusion of sheets for thermoforming household articles, blow moulded bottles, packaging for diary products, fruit-trays, biscuits, chocolates etc. Due to outstanding heat deflection stability (HDT), this grade is exquisitely applicable for food packaging, which are filled hot. TIPPLEN H 659 F is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Optical performance,Nucleation,Food contact compliance,Homopolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	1.7	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, injection molding	6.5	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	120	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	1900	MPa	ISO 527-2
tensile strength
Yield, injection molding	40.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	8.0	%	ISO 527-2
Bending modulus
injection molding	2000	MPa	ISO 178
Rockwell hardness
R-level	102		ISO 2039-2

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 245	°C
Melt temperature	190 to 245	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.