TOTAL Polystyrene Impact 625

About
Polystyrene 625: Is a medium impact polystyrene with balanced physical properties. Thin walled parts with complex runners and gates, run fast and consistently with the easy flow 625. The natural whiteness of this polymer allows for brightness of color matches. An excellent polymer for high gloss applications. TOTAL 625 is the base carrier of choice for many color concentrate producers. Application: Scale models Toys Housewares Containers requiring consistency from shot to shot. General Information: This material complies with FDA requirements as described in 21 CFR §177.1640. This material holds Underwriters Laboratory recognition 94HB; see UL File E55470 at www.UL.com. USP Class VI Material Safety Data Sheets are available to help customers satisfy their safety needs.&&

About

Polystyrene 625: Is a medium impact polystyrene with balanced physical properties. Thin walled parts with complex runners and gates, run fast and consistently with the easy flow 625. The natural whiteness of this polymer allows for brightness of color matches. An excellent polymer for high gloss applications. TOTAL 625 is the base carrier of choice for many color concentrate producers. Application: Scale models Toys Housewares Containers requiring consistency from shot to shot. General Information: This material complies with FDA requirements as described in 21 CFR §177.1640. This material holds Underwriters Laboratory recognition 94HB; see UL File E55470 at www.UL.com. USP Class VI Material Safety Data Sheets are available to help customers satisfy their safety needs.&&

Product Description
Supplier	TOTAL
Generic	PS (MIPS)
Material Status	Commercial: Active
Features	Good surface appearance,Good liquidity,HB
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³
Melt Flow Rate
200℃，5.0kg	13	g/10min	ASTM D1238
Shrinkage rate
MD	0.40 to 0.70	%	ASTM D955
humidity		%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2410	MPa	ASTM D638
tensile strength	24.8	MPa	ASTM D638
Tensile strain
fracture	40	%	ASTM D638
Bending modulus	2340	MPa	ASTM D790
bending strength	45.5	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	75	J/m	ASTM D256
Drop hammer impact	10.7	J	ASTM D3029

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	93.3	℃	ASTM D1525
Hot deformation temperature
annealing	87	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

optical performance	Nominal value	Unit	Test method
gloss
60°	97		ASTM D523

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.