Eltex® TUB171

About
Eltex® TUB 171 is a medium-density polyethylene copolymer designed for the extrusion of pressure pipes. It is classified PE 80 in accordance with ISO 12162 based on ISO 9080 analysis. Characteristics: PE 80 Black pipe compound Applications: Gas Water Industrial&&

Product Description
Supplier	INEOS
Generic	MDPE
Material Status	Commercial: Active
Features	Copolymer
Availabilitys	Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ISO 1183/A
Melt Flow Rate
190℃，5.0kg	0.85	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	750	MPa	ISO 527-1-2
tensile strength
Yield, 23 ℃	19.0	MPa	ISO 527-2/50
Tensile strain
Fracture, 23 ℃	> 350	%	ISO 527-2/50

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	121	℃	ISO 306/A

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.