| About |
|---|
| Boltaron 9815 is a proprietary, fire retardant, press laminated thermoplastic sheet designed to meet stringent FAA requirements for flammability, smoke generation and heat release as set forth in FAR 25.853 paragraphs (a) and (d). Boltaron 9815 offers excellent impact strength, abrasion resistance, stain and chemical resistance, and superior thermoformability. Colors: Custom Gauges: .031 to .250 Sheet Sizes: 50″x99″ & 55.5″x122″ (untrimmed) Textures: Haircell Industrial Smooth Crush Falmuth Suede&& |
| Product Description | |
|---|---|
| Generic | PMMA+PVC |
| Material Status | Commercial: Active |
| Features | The fouling resistance,High impact resistance,Low smoke,Flame Characteristics,Good wear resistance,Solvent resistance |
| Availabilitys | North America |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.49 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.50 to 0.70 | % | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 53 to 110 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 75.6 to 77.8 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 3.0E-5 | 1/℃ | ASTM D696 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| FAA Flammability | 1.0 0.2 | min | FAR 25.853 |
| NBS smoke density | |||
| — | < 100 | ||
| — | < 200 | ||
| exothermic | FAR 25.853 | ||
| 2 Min-Hrr | < 65 | kW/m² | FAR 25.853 |
| Peak-Hrr | < 65 | kW/m² | FAR 25.853 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Forming temperature | 168 to 185 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 112 to 115 | ASTM D785 | |
| tensile strength | |||
| yield | 40.0 to 44.1 | MPa | ASTM D638 |
| Bending modulus | 3030 to 3170 | MPa | ASTM D790 |
| bending strength | |||
| yield | 68.9 to 72.4 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Pass |
| 3. A1 F, Part IV |
| 4. 4 Min, F814-84(b) |
| 5. 1.5 Min, F814-84(b) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |