| About |
|---|
| This data sheet describes TEKNILID 1218 product This lid stock is designed for Food, Pharmaceutical, and Cosmetic applications requiring high oxygen and moisture barrier properties This lid stock is designed with a universal heat sealable (HS) seals to most trays (PET, PE, HIPS, and PVC) providing different levels of peelabililty depending on composition of tray and sealing conditions It is available with custom and standard printing. A bright white exterior provided by Polyester / white Polyethylene (W PE) outer layers makes an excellent printing surface for water based inks&& |
| Product Description | |
|---|---|
| Generic | 铝箔 |
| Material Status | Commercial: Active |
| Features | Good Printability,Low odor,Food contact compliance,Moisture resistance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| film | Nominal value | Unit | Test method |
| film thickness | 157 | µm | |
| Sealing emphasis | |||
| — | 0.78 | N/mm | |
| — | 0.78 | N/mm | |
| Oxygen transfer rate | |||
| 23℃，100% RH | 0.0 | cm³/m²/24 hr | |
| Water vapor transmittance | |||
| 38℃，90% RH | 0.0 | g/m²/24 hr | |
| dosage | 4.82 | m²/kg | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Thickness tolerance: ±10% |
| 3. To PET @ 350°F, 40psi, 0.5 sec |
| 4. To PE @ 350°F, 40psi, 0.5 sec |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |