| About |
|---|
| Product Description | |
|---|---|
| Supplier | Chang Chun |
| Generic | PBAT |
| Material Status | Commercial: Negative |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ISO 1183 |
| Moisture | 0.1 | % | ISO 62 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 20±3 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 15 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 300-400 | % | ISO 527-2 |
| Tensile modulus | 50 | MPa | ISO 527-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | |||
| 10℃/min | 120 | ℃ | ISO 11357 |
| Hot deformation temperature | |||
| 0.45MPa | 46 | ℃ | ISO-75 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |