| About |
|---|
| TPE based on SEPS, with good adhesion to polyolefins and engineering plastics.&& |
| Product Description | |
|---|---|
| Supplier | Lucobit |
| Generic | SEPS |
| Material Status | Commercial: Active |
| Features | Good bond |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 to 1.08 | g/cm³ | DIN 53479 |
| Melt Flow Rate | |||
| 190℃，5.0kg | 55 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 71 to 77 | DIN 53505 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | DIN 53504-S2 | ||
| yield | 4.90 to 6.90 | MPa | DIN 53504-S2 |
| 100% strain | 3.40 | MPa | DIN 53504-S2 |
| 300% strain | 4.60 | MPa | DIN 53504-S2 |
| 500% strain | 5.80 | MPa | DIN 53504-S2 |
| Tensile strain | |||
| fracture | 420 to 620 | % | DIN 53504-S2 |
| Compression deformation | |||
| 23℃，72 hr | 45 to 55 | % | DIN 53517 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |