Europrene® SOL T 190

About
Europrene® SOL T 190 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 16 % wt and diblock content is 25 %. A non-staining, TNPP free antioxidant system is added during the production process. Key Features Europrene® SOL T 190 is an easy processable, general purpose grade, characterised by an optimum balance of adhesive and cohesive properties. Main Applications The polymer is designed for hot melt pressure-sensitive adhesive applications. Europrene® SOL T 190 is also used in bitumen modification when enhanced adhesive properties are required.&&

About

Europrene® SOL T 190 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 16 % wt and diblock content is 25 %. A non-staining, TNPP free antioxidant system is added during the production process. Key Features Europrene® SOL T 190 is an easy processable, general purpose grade, characterised by an optimum balance of adhesive and cohesive properties. Main Applications The polymer is designed for hot melt pressure-sensitive adhesive applications. Europrene® SOL T 190 is also used in bitumen modification when enhanced adhesive properties are required.&&

Product Description
Generic	SIS
Material Status	Commercial: Active
Features	Excellent Processability,Block Copolymer,Good bond,Inoxidizability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	30		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	12.0	MPa	ASTM D412
300% strain	1.00	MPa	ASTM D412
Tensile strain
fracture	1200	%	ASTM D412

Supplementary information	Nominal value	Unit	Test method
Diblock Content	25.0	wt%
Shelf life	18	month

PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D792
Melt Flow Rate
190℃，5.0kg	9.0	g/10min	ASTM D1238
Combined with styrene	16.0	%	Internal Method
Brookfield viscosity
25wt% toluene sol	1.00	Pa·s	ASTM D1084

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.