| About |
|---|
| DURAFIDE® 0220A9 is a Polyphenylene Sulfide (PPS) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated High Toughness&& |
| Product Description | |
|---|---|
| Supplier | Polyplastics |
| Generic | PPS |
| Material Status | Commercial: Active |
| Features | Ultra high toughness,V-0 |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| IMPACT | Nominal value | Unit | Test method |
| Charpy Notched Impact Strength | |||
| 23℃ | 3.3 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 100 | ℃ | ISO 75-2/A |
| Linear coefficient of thermal expansion | |||
| TD | 6.0E-5 | 1/℃ | Internal Method |
| MD | 4.0E-5 | 1/℃ | Internal Method |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 2.0E+16 | ohms·cm | IEC 60093 |
| Dielectric strength | |||
| 3 mm | 19 | kV/mm | IEC 60243-1 |
| Relative permittivity | IEC 60250 | ||
| 1 kHz | 3.60 | IEC 60250 | |
| 1 MHz | 3.60 | IEC 60250 | |
| Dissipation factor | IEC 60250 | ||
| 1 kHz | 1.0E-3 | IEC 60250 | |
| 1 MHz | 1.0E-3 | IEC 60250 | |
| Arc resistance | 115 | sec | |
| Compared to the leakage tracing index | 125 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Color Number | HD9100 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 90.0 | MPa | ISO 527-2 |
| Nominal tensile fracture strain | 15 | % | ISO 527-2 |
| Bending modulus | 3800 | MPa | ISO 178 |
| bending strength | 140 | MPa | ISO 178 |
| Rockwell hardness | |||
| M-level | 95 | ISO 2039-2 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.35 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 23℃，24hr | 0.040 | % | ISO 62 |
| Apparent viscosity of melt | |||
| 310℃，1000 sec^-1 | 500000 | mPa·s | ISO 11443 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |