| About |
|---|
| Identification : Regenerated PVC, purified by centrifugal decantation, coming from the treatment of plasticized PVC waste Physical shape: Dark grey micro pellets (average particle size d50 about 0.300 mm) Typical uses: Pure or in mixture with primary material for production of membranes, flexible hoses and profiles, floorings, shoes soles, boots and other plasticized articles. Converting: Extrusion, calendering, injection moulding The product usually contains DEHP and lead (see safety data sheet) The product complies with UNI 10667-5&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Plasticizing |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ISO 1183 |
| Apparent density | 0.65 | g/cm³ | ISO 60 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 82 | ISO 868 | |
| tensile strength | |||
| Fracture, 23 ℃ | 17.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 300 | % | ISO 527-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |