| About |
|---|
| Torelina® A604 is a Polyphenylene Sulfide (PPS) product filled with 40% glass fiber. It is available in Asia Pacific, Europe, or North America. Applications of Torelina® A604 include electrical/electronic applications, appliances and automotive. Characteristics include: Flame Rated Good Toughness&& |
| Product Description | |
|---|---|
| Supplier | Toray |
| Material Status | Commercial: Active |
| Features | V-0,Good flexibility |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.67 | g/cm³ | ISO 1183 |
| Spiral Flow | 120 | mm | |
| Molding Shrinkage | |||
| vertical | 0.8 | % | |
| flow | 0.2 | % | |
| Water Absorption | |||
| 24 h，23℃ | 0.02 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | 205 | MPa | ISO 527-2 |
| Tensile Strain | |||
| brk | 2 | % | ISO 527 |
| Flexural Modulus | 14500 | MPa | ISO 178 |
| Flexural Strength | 290 | MPa | ISO 178 |
| Rockwell Hardness | 122 | ISO 2039-2 | |
| Taber Abrasion | 50 | mg | ISO 9352 |
| Frictional coefficient | 0.24 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy notched Impact strength | 11 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact strength | 60 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| HDT | |||
| 1.80 MPa | >260 | ℃ | ISO 75-1/-2 |
| Melting temperature | 278 | ℃ | ISO 11357-3 |
| Coeff.of linear therm expansion | |||
| flow | 2.3 | cm^-5/cm/℃ | ISO 11359-2 |
| vertical | 3.5 | cm^-5/cm/℃ | ISO 11359-2 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume Resistivity | 1E14 | ohms·m | IEC 60093 |
| Dielectric Strength | 24 | kV/mm | IEC 60243-1 |
| Dielectric Constant | 3.6 | IEC 60250 | |
| Dissipation Factor | 0.002 | IEC 60250 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | V-0 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 80x80x3mm |
| 3. vs. Metal |
| 4. 60% RH |
| 5. 98 MPa |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |