| About |
|---|
| Vinnolit MP 7151 is a fine grained PVC homopolymer with a medium emulsifier content. It yields plastisols exhibiting a very low viscosity at low/high shear rates and a Newtonian flow characteristic even at low plasticiser contents (40-60 phr). Plastisols with Vinnolit MP 7151 show a very low viscos, homogenous flow behaviour and very high filler tolerance, which makes it perfectly useful for higher speed coating process, e.g. in flooring base coatings, rotary screen printing applications as well as for textile base coats. Additionally a very good potlife characteristic and good thermostability bringing added value in that fields of application.&& |
| Product Description | |
|---|---|
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Features | Low Viscosity |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.38 | g/cm³ | ISO 60 |
| K-Value | 71.0 | ISO 1628-2 | |
| Viscosity value | |||
| Reduced viscosity | 128.0 | ml/g | ISO 1628 |
| Emulsifier Content | Medium | ||
| Volatiles | < 0.30 | % | ISO 1269 |
| Particle size distribution | < 0.50 | % | ISO 4610 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. retained on 0.063 mm screen |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |