| About |
|---|
| ECO PELLET® LC52A is a Polylactic Acid + PC (PLA+PC) material. It is available in Asia Pacific or North America for injection molding. Important attributes of ECO PELLET® LC52A are: Flame Rated RoHS Compliant Eco-Friendly/Green&& |
| Product Description | |
|---|---|
| Supplier | Techno |
| Generic | PLA+PC |
| Material Status | Commercial: Active |
| Features | Halogen free,Flame Characteristics,High reflectivity,V-0 |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 220℃，10 kg | 29.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD：23℃ | 0.50 to 0.80 | % | ISO 294-4 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 12 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 92.0 | ℃ | ISO 75-2/Af |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 115 | ISO 2039-2 | |
| tensile strength | |||
| 23℃ | 58.0 | MPa | ISO 527-2 |
| Bending modulus | |||
| 23℃ | 3000 | MPa | ISO 178 |
| bending strength | |||
| 23℃ | 90.0 | MPa | ISO 178 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 90 | °C | |
| Drying time | 4.0 to 5.0 | hr | |
| Barrel rear temperature | 210 to 240 | °C | |
| Barrel middle temperature | 220 to 250 | °C | |
| Barrel front temperature | 230 to 260 | °C | |
| Nozzle temperature | 220 to 250 | °C | |
| Processing (melt) temperature | 240 to 270 | °C | |
| Mold temperature | 60 to 80 | °C | |
| Injection pressure | 70.0 to 140 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |