| About |
|---|
| Ultramid® B40 L is a lubricated polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film and monofilaments.&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | High Viscosity,Food contact compliance,Lubricating,Grease resistance |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.12 to 1.15 | g/cm³ | ISO 1183 |
| Apparent density | 0.78 | g/cm³ | |
| Water absorption rate | |||
| Saturation, 23 ℃ | 9.5 | % | |
| Equilibrium, 23 ℃, 50% RH | 2.6 | % | |
| Viscosity number | |||
| 96% H2SO4 | 240 to 260 | cm³/g | ISO 307 |
| Extractables | < 0.6 | % | ISO 6427 |
| water content | < 0.060 | % | ISO 15512 |
| Relative viscosity | |||
| 1% in 96% Sulfuric Acid | 3.89 to 4.17 | ISO 307 | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 220 | ℃ | ISO 3146 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Particle shape | Round | ||
| Particle size | 2.00 to 2.50 | mm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |