| About |
|---|
| Ducor 2348TC is a CR modified propylene block copolymer with a good flowability and excellent impact/ stiffness balance. The product is formulated with a nucleation and antistatic stabilization package. Food Contact Applications: This grade is in compliance with most regulations regarding food contact applications (EU, FDA). Specific information is available upon request.&& |
| Product Description | |
|---|---|
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good liquidity,Controllable rheological,Nucleation,Food contact compliance,Block Copolymer,Antistatic property |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 48 | g/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | 2.0 | kJ/m² | ISO 179/1eA |
| -20℃ | 2.5 | kJ/m² | ISO 179/1eA |
| 0℃ | 3.5 | kJ/m² | ISO 179/1eA |
| 23℃ | 6.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | 35 | kJ/m² | ISO 179/1eU |
| -20℃ | 45 | kJ/m² | ISO 179/1eU |
| 0℃ | 80 | kJ/m² | ISO 179/1eU |
| 23℃ | No Break | ISO 179/1eU | |
| Impact strength of cantilever beam notch | ISO 180/1A | ||
| -30℃ | 2.0 | kJ/m² | ISO 180-1A |
| 23℃ | 4.0 | kJ/m² | ISO 180-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 53.0 | ℃ | ISO 75-2/A |
| 0.45 MPa, unannealed | 90.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | |||
| — | 151 | ℃ | ISO 306/A |
| — | 70.0 | ℃ | ISO 306/B |
| Melting temperature | |||
| DSC | 163 | ℃ | ISO 3146 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1350 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 27.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| fracture | 40 | % | ISO 527-2/50 |
| yield | 5.0 | % | ISO 527-2/50 |
| shear modulus | 710 | MPa | ISO 6721-2 |
| Ball hardness | |||
| H358/30 | 62.0 | MPa | ISO 2039-1 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |