| About |
|---|
| HD601CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. Applications HD601CF is recommended for Textile packaging film Food packaging Lamination films Stationary films Flower packaging Special features HD601CF is optimised to deliver: Easy processability Good mechanical properties Heat sterilisable High stiffness Good optical properties&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Good surface appearance,Good Gauge Control,Homopolymer,Heat sterilization |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 to 0.910 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 8.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | |||
| 23 ℃, injection molding | 1450 | MPa | ISO 178 |
| friction coefficient | |||
| With oneself – dynamic | > 0.70 | ISO 8295 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Membrane puncture force | 1000 | N | ISO 7765-2 |
| Tensile modulus | ISO 527-3 | ||
| MD | 650 to 750 | MPa | ISO 527-3 |
| TD | 650 to 750 | MPa | ISO 527-3 |
| tensile strength | ISO 527-3 | ||
| MD | 30.0 to 50.0 | MPa | ISO 527-3 |
| TD | 25.0 to 45.0 | MPa | ISO 527-3 |
| Tensile strain | ISO 527-3 | ||
| MD, fracture | 500 to 700 | % | ISO 527-3 |
| TD, fracture | 500 to 700 | % | ISO 527-3 |
| Dart impact equipped with measuring instruments | |||
| 50 µm，Total Energy | 12.0 | J | ISO 7765-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 154 | ℃ | ISO 306/A50 |
| Melting temperature | |||
| DSC | 162 to 166 | ℃ | ISO 3146 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 20°，50 µm | > 120 | ASTM D2457 | |
| Haze | < 2.0 | % | ASTM D1003 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Metal Adhesion | Excellent | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |