CERTENE™ LDF-0822A

About
LDF-0822A is a certified prime resin specially designed for production of shrink wrapping Blown films for case bundling applications requiring excellent shrink performance, very high toughness, good puncture and burn-through resistance. LDF-0822A is also recommended for impact liner films. It features easy processability with excellent film optical and mechanical properties. Minimum recommended film thickness is 1.5 mils. LDF-0822A contains no slip and no antiblock.&&

About

LDF-0822A is a certified prime resin specially designed for production of shrink wrapping Blown films for case bundling applications requiring excellent shrink performance, very high toughness, good puncture and burn-through resistance. LDF-0822A is also recommended for impact liner films. It features easy processability with excellent film optical and mechanical properties. Minimum recommended film thickness is 1.5 mils. LDF-0822A contains no slip and no antiblock.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Excellent Processability,Optical performance,Ultra high toughness,Low density,Puncture Resistant,High shrinkage
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.922	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.80	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	38	µm
Secant modulus
1% secant, TD, 38 µ m	235	MPa	ASTM D882
1% secant, MD, 38 µ m	186	MPa	ASTM D882
tensile strength
TD, fracture, 38 µ m	23.0	MPa	ASTM D882
TD, yield, 38 µ m	12.0	MPa	ASTM D882
MD, fracture, 38 µ m	31.0	MPa	ASTM D882
MD, yield, 38 µ m	12.0	MPa	ASTM D882
Tensile strain
TD, fracture, 38 µ m	550	%	ASTM D882
MD, fracture, 38 µ m	220	%	ASTM D882
Drop hammer impact
38 µm	95	g	ASTM D1709-A
tear strength
TD，38 µm	140	g	ASTM D1922
MD，38 µm	720	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
45°，38 µm	60		ASTM D2457
Haze
38 µm	6.8	%	ASTM D1003

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	180 to 210	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.