| About |
|---|
| DOW R352-08R 聚丙烯树脂是一种高流动的无规共聚物聚丙烯，用于高质量包装所需的流延薄膜的制造。DOW R352-08R 聚丙烯树脂不含滑爽剂和开口剂。 DOW R352-08R 聚丙烯树脂的应用领域: 食品包装 高质量的文具 复合薄膜 纺织品包装 多层结构中的热封层 法规信息 DOW R352-08R 聚丙烯树脂应该符合以下法规的要求： EU, No 10/2011 美国食品和药物管理局法规 21 CFR 177.1520(c)3.1a 请查询法规以获取完备的细节资料。&& |
| Product Description | |
|---|---|
| Supplier | Braskem |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 8.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | |||
| injection molding | 700 | MPa | ISO 178 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 50 | µm | |
| Tensile modulus | ISO 527-3 | ||
| 1% secant, MD, 50 µ m, cast thin film | 410 | MPa | |
| 1% secant, TD, 50 µ m, cast thin film | 420 | MPa | |
| tensile strength | ISO 527-3 | ||
| Yield, injection molding | 22.0 | MPa | ISO 527-2 |
| MD, fracture, 50 µ m, blow molded film | 47.0 | MPa | |
| TD, fracture, 50 µ m, blow molded film | 29.0 | MPa | |
| Tensile strain | ISO 527-3 | ||
| Yield, injection molding | 14 | % | ISO 527-2 |
| MD, fracture, 50 µ m, cast thin film | 450 | % | |
| TD, fracture, 50 µ m, cast thin film | 590 | % | |
| Drop hammer impact | |||
| 50 µ m, cast thin film | 650 | g | ISO 7765-1 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| 0 ℃, injection molding | 3.0 | kJ/m² | |
| 23 ℃, injection molding | 8.5 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 75.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | 127 | ℃ | ISO 306/A |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45 °, 50.0 µ m, cast thin film | 85 | ASTM D2457 | |
| Haze | |||
| 50 µ m, cast thin film | 1.4 | % | ASTM D1003 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |