DOW™ VLDPE DFDB-9042 NT

About
High performance sealant layer in flexible packaging Good optics, low temperature seal initiation and abuse resistance Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) Although this product has been granted Canadian Health Products and Food Branch (HPFB) No Objection Status, it is the responsibility of the end-user to consult HPFB before using this product in a food contact or pharmaceutical packaging application. Some restrictions may apply in Canada on the use of this product. Contact the Canadian Regulatory Specialist for information on specific applications where No Objection Status was granted for this product. DFDB-9042 NT Very Low Density Polyethylene (VLDPE) Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer designed to provide blown and cast film products with low temperature sealability, good optics and good abuse resistance. It has value as a sealant layer in multilayer film structures for dry and liquid packaging.&&

About

High performance sealant layer in flexible packaging Good optics, low temperature seal initiation and abuse resistance Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) Although this product has been granted Canadian Health Products and Food Branch (HPFB) No Objection Status, it is the responsibility of the end-user to consult HPFB before using this product in a food contact or pharmaceutical packaging application. Some restrictions may apply in Canada on the use of this product. Contact the Canadian Regulatory Specialist for information on specific applications where No Objection Status was granted for this product. DFDB-9042 NT Very Low Density Polyethylene (VLDPE) Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer designed to provide blown and cast film products with low temperature sealability, good optics and good abuse resistance. It has value as a sealant layer in multilayer film structures for dry and liquid packaging.&&

Product Description
Supplier	DOW
Generic	VLDPE
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.899	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	5.2	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	-52.2	℃	Internal Method
Melting temperature
DSC	119	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ASTM D2240
Shore A, 1 second	91		ASTM D2240
Shore A, 5 seconds	93		ASTM D2240
tensile strength
fracture	11.4	MPa	ASTM D638
Tensile strain
fracture	900	%	ASTM D638
Bending modulus
2% secant	117	MPa	ASTM D790-A

Notes
1. With limitations
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.