Andur 7003 AP-M/Curene® 89-LC

About
Andur 7003AP-M is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer. A water-white clear elastomer with a hardness of 70 Shore A is obtained when this prepolymer is cured with Curene 89-LC. Elastomers of lower hardness can be obtained through the use of plasticizers.&&

Product Description
Generic	PUR-脂肪族+TDI
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	70		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
yield	20.0	MPa	ASTM D412
100% strain	3.10	MPa	ASTM D412
300% strain	5.17	MPa	ASTM D412
Tensile strain
fracture	620	%	ASTM D412
Basho’s elasticity	73	%	ASTM D2632

THERMAL	Nominal value	Unit
storage stability	2.0 to 3.0	min
stripping time
100℃	20	min

Process Conditions
injection	Nominal value	Unit	Test method
Mold temperature	22 to 100	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.