Ultramid® A27 E

About
Ultramid® A27 E is a polyamide 66 grade for compounding.&&

Product Description
Supplier	BASF
Generic	PA66
Material Status	Commercial: Active
Features	Grease resistance
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.12 to 1.15	g/cm³	ISO 1183
Apparent density	0.78	g/cm³
Water absorption rate
Saturation, 23 ℃	8.5	%
Equilibrium, 23 ℃, 50% RH	2.2	%
Viscosity number
96% H2SO4	142 to 158	cm³/g	ISO 307
water content	< 0.20	%	ISO 15512
Relative viscosity
1% in 96% Sulfuric Acid	2.62 to 2.83		ISO 307

THERMAL	Nominal value	Unit	Test method
Melting temperature
DSC	260	℃	ISO 3146

Supplementary information	Nominal value	Unit	Test method
Black Specks	< 4.00	mm²/kg	Internal Method
Particle shape	Round

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.