3M™ Dyneon™ Perfluoroelastomer PFE 40Z

About
3M™ Dyneon™ Perfluoroelastomer PFE 40Z is a technically advanced peroxide curable perfluoroelastomer. This product has been designed to have improved acid, water and steam resistance over 3M™ Dyneon™ Perfluoroelastomer PFE 90Z, since it can be formulated without the need for an inorganic base such as zinc oxide. It is classified as FFKM per ASTM D1418. Special Features Ideal for wet chemical, fluid handling, cleaning and chemical etching processes for CPI, aerospace and semiconductor manufacturing Good compression set resistance Continuous use temperature up to 220°C Low metal ion content with low extractables in a wide range of chemicals Typical Applications Dyneon Perfluoroelastomer PFE 40Z has been designed to meet the challenges of demanding sealing applications. Its fully fluorinated backbone structure provides a very broad chemical and thermal stability. It can be used in applications such as mechanical seals, valves, pumps, reactors, mixers, ink/printing systems, painting systems, rubber-metal bonding parts, among others.&&

About

3M™ Dyneon™ Perfluoroelastomer PFE 40Z is a technically advanced peroxide curable perfluoroelastomer. This product has been designed to have improved acid, water and steam resistance over 3M™ Dyneon™ Perfluoroelastomer PFE 90Z, since it can be formulated without the need for an inorganic base such as zinc oxide. It is classified as FFKM per ASTM D1418. Special Features Ideal for wet chemical, fluid handling, cleaning and chemical etching processes for CPI, aerospace and semiconductor manufacturing Good compression set resistance Continuous use temperature up to 220°C Low metal ion content with low extractables in a wide range of chemicals Typical Applications Dyneon Perfluoroelastomer PFE 40Z has been designed to meet the challenges of demanding sealing applications. Its fully fluorinated backbone structure provides a very broad chemical and thermal stability. It can be used in applications such as mechanical seals, valves, pumps, reactors, mixers, ink/printing systems, painting systems, rubber-metal bonding parts, among others.&&

Product Description
Generic	PFE
Material Status	Commercial: Active
Features	Low extract,Low (to None) Ion Content,Solvent resistance,Heat Stabilized
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.00	g/cm³	Internal Method
Mooney viscosity
ML 1+10，121℃	40	MU	Internal Method
Fluorine content	72	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	72		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	19.0	MPa	DIN 53504
100% strain	10.4	MPa	DIN 53504
Tensile strain
fracture	140	%	DIN 53504
Compression deformation			ASTM D395B
200℃，70 hr	15	%	ASTM D395B
220℃，70 hr	28	%	ASTM D395B

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.