ALTECH® PC ECO 1000/121

About
ALTECH® PC ECO 1000/121 is a Polycarbonate (PC) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALTECH® PC ECO 1000/121 include electrical/electronic applications, engineering/industrial parts, housings and lighting applications. Characteristics include: Eco-Friendly/Green Flame Rated RoHS Compliant Impact Modified UV Stabilized&&

About

ALTECH® PC ECO 1000/121 is a Polycarbonate (PC) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALTECH® PC ECO 1000/121 include electrical/electronic applications, engineering/industrial parts, housings and lighting applications. Characteristics include: Eco-Friendly/Green Flame Rated RoHS Compliant Impact Modified UV Stabilized&&

Product Description
Supplier	ALBIS
Generic	Polycarbonate
Material Status	Commercial: Active
Features	Weather resistance is good,High impact resistance,Renewable resources
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ISO 1183
Melt Flow Rate	15	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2300	MPa	ISO 527-2
tensile strength	60.0	MPa	ISO 527-2
Tensile strain
fracture	40	%	ISO 527-2
Bending modulus	2300	MPa	ISO 178
bending strength	100	MPa	ISO 178

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
—	60	kJ/m²
-40℃	11	kJ/m²
-20℃	12	kJ/m²
Charpy Unnotch Impact strength
—	无断裂
-40℃	无断裂
-20℃	无断裂

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	122	℃	ISO 75-2/A
Vicat Softening Temp
B50	140	℃	ISO 306

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	V-2		UL 94
Glowing wire flammability index
2.0 mm	850	℃	IEC 60695-2-12

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – Dehumidifying desiccant	110	°C
Drying time – Dehumidifying desiccant	4.0 to 24	hr
Recommended maximum moisture content	< 0.050	%
Processing (melt) temperature	280 to 300	°C
Mold temperature	80 to 120	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.