KMI PP KM-099IB

About
KM-099IB is s high flow impact PP resin for injection molding applications. KM-099IB is a reactor-made block, PP which exhibits high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and well designed rubber morphology. They are suitable for the injection molding of large-scale articles and thin products Food Contact Application: KM-099IB meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Characteristics: Excellent balance between stiffness and impact strength Long-term heat resistance and high flowability&&

About

KM-099IB is s high flow impact PP resin for injection molding applications. KM-099IB is a reactor-made block, PP which exhibits high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and well designed rubber morphology. They are suitable for the injection molding of large-scale articles and thin products Food Contact Application: KM-099IB meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Characteristics: Excellent balance between stiffness and impact strength Long-term heat resistance and high flowability&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,High liquidity,Food contact compliance,Block Copolymer,High crystallization,Impact copolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	80	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	49	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	120	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	90		ASTM D785
tensile strength
yield	31.4	MPa	ASTM D638
Tensile strain
fracture	< 50	%	ASTM D638
Bending modulus	1720	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.