Hostalen GM 9350 C black

About
Hostalen GM 9350 C black is a compounded high molecular weight high density polyethylene (HDPE). Typical customer applications include fuel tank filler pipes requiring electrical conductivity. It is supplied in pellets and is stabilized with antioxidants for the extrusion process. The product features a very good Enviromental Stress Cracking Resistance (ESCR) and a good chemical resistance. Typical processes include blow molding and injection molding. Hostalen GM 9350 C black is not intended for use in medical and pharmaceutical applications. The product can not be used for food contact applications.&&

About

Hostalen GM 9350 C black is a compounded high molecular weight high density polyethylene (HDPE). Typical customer applications include fuel tank filler pipes requiring electrical conductivity. It is supplied in pellets and is stabilized with antioxidants for the extrusion process. The product features a very good Enviromental Stress Cracking Resistance (ESCR) and a good chemical resistance. Typical processes include blow molding and injection molding. Hostalen GM 9350 C black is not intended for use in medical and pharmaceutical applications. The product can not be used for food contact applications.&&

Product Description
Supplier	LyondellBasell
Generic	HDPE
Material Status	Commercial: Active
Features	Conductive,Inoxidizability,High molecular weight,Solvent resistance,High ESCR
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.995	g/cm³	ISO 1183
Apparent density	0.55	g/cm³	ISO 60
Melt Flow Rate
190℃，21.6kg	3.0	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1200	MPa	ISO 527-2
tensile strength
yield	28.0	MPa	ISO 527-1-2
Tensile strain
yield	7.0	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Tensile impact strength
-30℃	45.0	kJ/m²	ISO 8256/1B

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+4	ohms	IEC 60093
Volume resistivity	1.0E+5	ohms·cm	IEC 60093

Supplementary information	Nominal value	Unit	Test method
Blowing molding temperature	180 to 230	℃

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	240 to 270	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.