抚顺 100N

About

Product Description
SupplierFushun
GenericHDPE
Material StatusCommercial: Active
AvailabilitysAsia Pacific

Technical Data
PHYSICALNominal valueUnitTest method
Density0.948g/cm³
Melt Flow Rate
190℃0.22g/10min

MECHANICALNominal valueUnitTest method
tensile strength
yield23MPa
Tensile strain>1000%
Bending modulus1050MPa

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch
23℃25kJ/m²

THERMALNominal valueUnitTest method
Softening temperature74

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.