TOTAL Polyethylene Lumicene® M 4040 (Cast Film)

About
Lumicene® mPE M 4040 is a second generation metallocene based Polyethylene with hexene as comonomer. Lumicene® mPE M 4040 can be processed at high output rates with low extrusion pressure, low neck-in, excellent drawability and gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The high stiffness combined with excellent optical properties brings a significant down-gauging potential. Lumicene® mPE M 4040 is a versatile resin that can be used in pure or in blend for the production of both monolayer and multilayer film. Main applications are: specialty film, hygiene film, embossed film, compounds and consumer and automatic packaging, such as produce bags, mailing and hygiene overwrap film.&&

About

Lumicene® mPE M 4040 is a second generation metallocene based Polyethylene with hexene as comonomer. Lumicene® mPE M 4040 can be processed at high output rates with low extrusion pressure, low neck-in, excellent drawability and gauge control in comparison with conventional LLDPE and first generation metallocene based polyethylene. The high stiffness combined with excellent optical properties brings a significant down-gauging potential. Lumicene® mPE M 4040 is a versatile resin that can be used in pure or in blend for the production of both monolayer and multilayer film. Main applications are: specialty film, hygiene film, embossed film, compounds and consumer and automatic packaging, such as produce bags, mailing and hygiene overwrap film.&&

Product Description
Supplier	TOTAL
Generic	mMDPE
Material Status	Commercial: Active
Features	Good Rigidity,Good dissection,Good Gauge Control,Low shrinkage,Inoxidizability,Hexene copolymers
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	4.0	g/10min	ISO 1133

film	Nominal value	Unit	Test method
film thickness
test	20	µm
tensile strength
MD, yield, 20 µ m, blow molded film	14.5	MPa
TD, yield, 20 µ m, blow molded film	14.7	MPa
MD, fracture, 20 µ m, blow molded film	33.0	MPa
TD, fracture, 20 µ m, blow molded film	26.0	MPa
Tensile strain
MD, fracture, 20 µ m, cast thin film	480	%
TD, fracture, 20 µ m, cast thin film	610	%
Drop hammer impact
20 µ m, cast thin film	30	g	ISO 7765-1
Elmandorf tear strength
MD: 20 µ m, cast thin film	11	N
TD: 20 µ m, cast thin film	90	N

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	122	℃	ISO 306
Melting temperature	126	℃	ISO 11357-3

optical performance	Nominal value	Unit	Test method
gloss
45 °, 20 µ m, cast thin film	86		ASTM D2457
Haze
20.0 µ m, cast thin film	5.5	%	ISO 14782

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	240 to 280	°C
Traction roller	20 to 60	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.