Prixene® PC200I00I

About
Prixene® PC200I00I is a polypropylene copolymer resin with high fluidity impact which requires a balance of rigidity and resistance. PP provides better processability, a high flow to facilitate the geometry filling of the mold, fast cycles and good dimensional stability. Typical applications range from automotive interior finishes, toys, lids, household items and parts of electrical appliances. The features presented are fast cycles, good dimensional stability, high flow, high impact resistance and can be in contact with food. The product form is in pellets. PP for injection molding. The material complies with FDA regulation title 21.CFR177.1520 (a) 3(i), FDA21 CFR 177.1520(c) 3.1 y FDA21CFR 177.1520(c) 3.2.&&

About

Prixene® PC200I00I is a polypropylene copolymer resin with high fluidity impact which requires a balance of rigidity and resistance. PP provides better processability, a high flow to facilitate the geometry filling of the mold, fast cycles and good dimensional stability. Typical applications range from automotive interior finishes, toys, lids, household items and parts of electrical appliances. The features presented are fast cycles, good dimensional stability, high flow, high impact resistance and can be in contact with food. The product form is in pellets. PP for injection molding. The material complies with FDA regulation title 21.CFR177.1520 (a) 3(i), FDA21 CFR 177.1520(c) 3.1 y FDA21CFR 177.1520(c) 3.2.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	High impact resistance,Good Dimensional Stability,High liquidity,Quick molding cycle,Food contact compliance
Availabilitys	Latin America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	20	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	91	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	100		ASTM D785
tensile strength
yield	24.1	MPa	ASTM D638
Tensile strain
yield	7.0	%	ASTM D638
Bending modulus
1% secant	1140	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2.0 in/min
3. 0.051 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.