ICORENE® N1018

About
ICORENE® N1018 is a premium copolymer of ethylene vinyl acetate specifically with a high MFI. It is designed for the preparation of masterbatch. The powder form can achieve better colour developments or additive dispersion in a masterbatch than the pellet form. The vinyl acetate content is about 28 %.&&

Product Description
Generic	EVA
Material Status	Commercial: Active
Features	High liquidity,Machinable,Food contact compliance,Copolymer,Heat Stabilized,Good coloring
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	400	g/10min	ISO 1133
Vinyl acetate content	28.0	wt%	Internal Method

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	66.0	℃	ASTM D3418

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	71		ISO 868
tensile strength
fracture	3.00	MPa	ISO 527-2
Tensile strain
fracture	500	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.