3M™ Dyneon™ Fluoroelastomer FE 5641Q

About
Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Low shrinkage version of FE 5640Q Process targets: compression molding Improved scorch resistance at high molding temperatures Proprietary incorporated cure technology Excellent mold release Improved cure technology resulting in more consistent part size from successive molding cycles Clean running Compounds prepared from FE5641Q can be formulated to meet Mil-R-83248&&

About

Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Low shrinkage version of FE 5640Q Process targets: compression molding Improved scorch resistance at high molding temperatures Proprietary incorporated cure technology Excellent mold release Improved cure technology resulting in more consistent part size from successive molding cycles Clean running Compounds prepared from FE5641Q can be formulated to meet Mil-R-83248&&

Product Description
Generic	氟橡胶
Material Status	Commercial: Active
Features	Excellent Processability,Low contractility,Good stripping performance,Copolymer
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.80	g/cm³
Mooney viscosity
ML 1+10，121℃	40	MU
Fluorine content	66	%

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	76		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	16.1	MPa
100% strain	6.69	MPa
Tensile strain
fracture	190	%
Compression deformation
200℃，70 hr	11	%	ASTM D395B
MH
177℃	2.76	J
200℃	2.30	J
ML
177℃	0.158	J
200℃	0.136	J
t’50
177℃	2.8	min
200℃	0.7	min
t’90
177℃	3.8	min
200℃	0.8	min
ts2
177℃	2.3	min
200℃	0.6	min

Supplementary information	Nominal value	Unit	Test method
Tr10	-18	℃	ASTM D1329

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.