| About |
|---|
| Oil extended blend with 75 phr of plasticizer for low hardness printing rolls.&& |
| Product Description | |
|---|---|
| Generic | PVC+NBR |
| Material Status | Commercial: Active |
| Features | Low Hardness,Plasticizing |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | |
| Mooney viscosity | |||
| ML 1+4 | 14 to 26 | MU | |
| ACN Content | 33 | % | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| NBR/PVC Ratio | 62.5/37.5 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Measured on NBR part |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |