| About |
|---|
| Moplen EPD60R is a high molecular weight hetrophasic copolymer for blow moulding and extrusion and is designed to produce items with superior toughness even at low temperatures. Moplen EPD60R exhibits excellent heat and detergent resistance. Because of its excellent impact strength and its particular formulation, Moplen EPD60R is well suited for extrusion blow moulding appliance components, wheels, under the hood automotive parts, toolboxes, suitcases and large containers. Extrusion applications of Moplen EPD60R include profiles, pipes and tough sheet for industrial applications. Sheet produced with Moplen EPD60R is also well suited for thermoforming trays for cold storage. Moplen EPD60R can be compression moulded into thick sheets. * Moplen EPD60R is suitable for food contact.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good flexibility,High impact resistance,Food contact compliance,High Heat Resistance,Copolymer,Low temperature toughness,Resistance to detergents |
| Availabilitys | Africa & Middle East |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 0.35 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -20℃ | 70 | J/m | ASTM D256 |
| 23℃ | 600 | J/m | ASTM D256 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Oven Aging | |||
| 150℃ | 2.7 | month | ASTM D3012 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 82.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 120 | ℃ | ASTM D1525 2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 76 | ASTM D785 | |
| tensile strength | |||
| yield | 27.0 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 15 | % | ASTM D638 |
| Bending modulus | 1100 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |