| About |
|---|
| SEALUTION™ 220 Peel Polymer is a peelable sealant resin that seals to itself, polypropylene and polyethylene. The resin exhibits a consistently low peel force while maintaining excellent clarity and processability on a blown film line. Main Characteristics: Broad easy peel seal window Low and consistent peel force Seals to Polyethylene and Polypropylene Low haze enables high clarity applications Excellent blown film processibility allowing high output rates Complies with: Europe Commission Regulation (EU) No 10/2011 U.S. FDA Canadian HPFB No Objection Consult the regulations for complete details.&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | EPE |
| Material Status | Commercial: Active |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.911 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.7 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 41 | µm |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 110 | ℃ | DSC |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| 40.6 µm | 9.7 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Coextruded Film Thicknes |
| 3. Internal Method |
| 4. Coextruded Film |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |