| About |
|---|
| SABIC®COHERE™8185是通过使用茂金属催化剂的溶液聚合制备的乙烯 – 辛烯共聚物。 它 在高性能薄膜应用中表现良好，具有出色的凝胶控制，并且韧性，热性能优异 粘性，密封性和光学性能。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | POP |
| Material Status | Commercial: Active |
| Features | Heat Resistance, Good,Soft |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| Density | |||
| 23℃ | 0.885 | g/cm³ | ASTM D792 |
| tensile property | Nominal value | Unit | Test method |
|---|---|---|---|
| 100% modulus | 16.7 | MPa | ASTM D638 |
| 100% modulus | 4.6 | MPa | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | ~74 | ℃ | SABIC method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | |||
| C-type | 58.5 | kN/m | ASTM D624 |
| Tensile strain | |||
| fracture | 700 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 29.4 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |