Aquivion® PW98

About
Aquivion® PW98 is a coarse, acid powder based on the short-side-chain (SSC) copolymer of Tetrafluoroethylene and the Sulfonyl Fluoride Vinyl Ether (SFVE) CF2=CF-O-(CF2)2-SO2F produced by Solvay. The resulting perfluoropolymer’s functional groups are in their sulfonic acid form, SO3H. Aquivion® PW98 exhibits ionic exchange capacity and it can be used as is under conditions where conventional exchange resins have shown insufficient chemical resistance. Given the resin’s superacid functionality with many active groups it can also be used either directly or as an ingredient of composite structures active as heterogeneous catalysts. This encompasses a wide range of organic syntheses and respective reaction mechanisms. PW98 is characterized by a high degree of polymer crystallinity. It is insoluble in water, acid or bases and in most solvents unless extreme conditions are applied. Furthermore, Aquivion® PW98 can be dissolved in some organic solvents to produce ion exchage capacity membranes. Proper organic solvents are dipolar aprotic such as N-ethyl-2-pyrrolidone (NEP) and dimethyl sulfoxide. To facilitate the dissolution, slightly increase the temperature to 50-60°C. Please visit Aquivion.com for more information.&&

Product Description
SupplierSolvay
GenericPFSA
Material StatusCommercial: Active
AvailabilitysNorth America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
equivalent
EW940 to 1020g/eqInternal Method
water content5.0%
Total acidity0.980 to 1.06meq/gInternal Method

Notes
1. Typical properties: these are not to be construed as specifications.
2. eq = (mol SO2F)
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.